Variable Rake Guillotines

Image:

Durma VS Series Variable Rake Guillotine

The standard features allow the adjustment of a great variety of parameters that influence the cut quality, namely rigidity, rake angle, blade clearance etc. On the CNC-HGM model the blade gap clearance, rake angle, cutting length and backgauge positioning are automatically adjusted after programming the DNC with the data of the plate to be cut.

The deep throat allows for the cutting of sheet plates longer than the blade length. The backgauge has a retract movement for a slight swing during the cut, helping the cut-off strips fall down and therefore preventing the strips becoming jammed between the backgauge and the fixed blade.

Variable Rake

The possibility of changing the rake angle (either increase or reduce) depending on different plate thickness ensures a better cutting performance with minimum strip deformation. The position of the rake angle is set by means of an electronic control, by setting the thickness to be cut, the ram goes automatically into position and chooses the ideal cutting angle

View the VS Series Variable Rake Guillotine video here.

Standard Equipment

Optional Equipment

♦	Heavy duty St44 AI steel construction and stress relieved frame
♦	User friendly CNC Touchscreen control unit - D-Touch 7
♦	Automatically adjusted rake angle by CNC
♦	Automatically adjusted blade angle by CNC
♦	Automatically adjusted cutting angle by CNC
♦	Ball integrated front tables
♦	Ballscrew back gauge, 1000mm
♦	1mt flip-up finger guards
♦	Squaring arm with scale & T-Slot & Tilting stop (L=1500mm)
♦	Illumination and Shadow line
♦	Throat depth with 350mm
♦	Automatically pressure adjusted solid holddownds
♦	Top and bottom blades with 4 sides
♦	Foot pedal
♦	High performance hydraulics and electronics components

♦	CE-Norm for EU
♦	DNC 61 or DAC 350 control unit
♦	HI SPEED (stroke/minute)
♦	Laser cutting line
♦	Light curtains for finger protection
♦	Pneumatic sheet support device 'standard' - Durma I
♦	Pneumatic sheet support device 'two steps' - Durma II
♦	Pneumatic sheet support device 'return to sender' - Durma III
♦	Sheet support device with conveyor belt and scrap container
♦	Stacker + Alignment cylinder
♦	CNC front feeding system
♦	Hydraulic anti-twist device
♦	Special throat device
♦	Backgauge 1250mm
♦	X1, X2 Axis
♦	Hydraulic swing-up back guage
♦	Adjustable holddown pressure
♦	Oil coolant
♦	Central lubrication manual
♦	Central lubrication motorised
♦	Adjustable angle stop 0-180°
♦	add. Support arms
♦	Special blades
♦	Special colour
♦	Control panel on opposite position
♦	Temperature measurement
♦	Overseas special packaging

			3006	3010	3013	3016	3020	4006	4013	4016
Cutting length	(A)	mm	3080	3080	3080	3080	3080	4080	4080	4080
Cutting capacity	MS(450N/mm2)	mm	6	10	13	16	20	6	13	16
	SS(700N/mm2)	mm	4	8	10	13	16	4	10	10
Stroke per min		min.1/mm	12	10	9	7	6	10	7	5
		max.1/mm	20	20	17	12	12	20	13	9
Hi Speed stroke/min		min.1.min	21	15	15	11	9	19	13	10
		max.1/min	33	27	27	18	17	31	25	17
Cutting angle		minimum	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'
		maximum	2°	2°	2° 30'	2° 30'	2° 30'	2°	2° 30'	2° 30'
Number of Holddowns		Units	16	16	17	14	14	20	20	17
Holddown force		min-ton	4	4	8	11	17	4	10	50
		max-ton	20	20	40	55	83	20	48	100
Backguage course		min	1000	1000	1000	1000	1000	1000	1000	1000
Backguage speed		mm/sec	200	200	200	200	200	200	200	200
Motor Power		kW	11	22	30	45	45	11	30	45
Oil Capacity		lt	125	180	300	145	500	125	330	400
Throat depth	(D)	mm	350	350	350	350	350	350	350	350
Front arms		units	3	3	3	3	3	4	4	4
Table height	(C)	mm	820	820	835	840	840	820	835	1000
Table width	(B)	mm	494	554	559	554	580	494	589	630
Table length	(R)	mm	3280	3360	3380	3420	3460	4400	4400	4385
Length	(L)	mm	4100	3800	4200	4130	4100	5150	5200	5890
Width	(W1)	mm	2050	2050	2100	2210	2300	2100	2150	2100
Total width	(W)	mm	3650	3550	3560	3820	3700	3550	3560	3625
Height	(H)	mm	1950	2150	2450	2570	2650	2050	2550	2950
Weight		kg	7500	9300	12900	18000	21500	12000	23600	23600

			4020	6006	6013	6016	6020	6025	8010	10013
Cutting length	(A)	mm	4080	6080	6080	6080	6080	6100	8100	10100
Cutting capacity	MS(450N/mm2)	mm	20	6	13	16	20	25	10	13
	SS(700N/mm2)	mm	16	4	8	10	13	18.5	6	8
Stroke per min		min.1/mm	4	6	5	4	3	3	3	3
		max.1/mm	8	10	10	10	6	6	6	6
Hi Speed stroke/min		min.1.min	8	-	-	-	-	-	-	-
		max.1/min	16	-	-	-	-	-	-	-
Cutting angle		minimum	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'	0° 30'
		maximum	2° 30'	2°	2° 30'	2° 30'	3° 15'	3° 25'	2°	2° 12'
Number of Holddowns		Units	21	29	29	29	29	30	40	52
Holddown force		min-ton	50	10	29	29	48	150	40	60
		max-ton	100	20	58	58	100	250	60	81
Backguage course		min	1000	1000	1000	1000	1000	1000	1000	1500
Backguage speed		mm/sec	200	200	200	200	200	200	200	200
Motor Power		kW	45	22	37	45	45	55	30	45
Oil Capacity		lt	500	200	400	550	700	750	550	650
Throat depth	(D)	mm	350	350	350	350	350	350	500	750
Front arms		units	4	6	6	6	6	6	7	9
Table height	(C)	mm	1000	900	950	950	1000	1000	1220	1210
Table width	(B)	mm	630	630	650	650	800	900	850	860
Table length	(R)	mm	4405	6370	6375	6375	6595	6750	8545	10630
Length	(L)	mm	5900	7300	7400	7400	8100	7850	9100	11500
Width	(W1)	mm	2200	2150	2200	2200	2800	2900	3350	3400
Total width	(W)	mm	3775	3400	3700	3790	4100	4250	4200	4240
Height	(H)	mm	2950	2750	2900	2950	3530	3400	3280	3800
Weight		kg	29000	25300	33800	38700	61000	72000	87000	147000

Specifications subject to change without notice

Download the VS Brochure

go back

About New Century Machinery

New Century Machinery have been supplying engineering machinery for over 30 years. We supply and source machinery for all types of industry

Get in touch

New Century Machinery
Unit 2,
Riverside Industrial Estate,
Margaret Street,
Ashton-under-Lyne,
OL7 0QQ

+44 (0) 161 330 4242

+44 (0) 161 343 1347